High definition 6 Way Rf Splitter - Power Divider N-F Connector 130-180MHz JX-PS-2G6G-02N – Jingxin Technology

Send email to us

Product Detail

Product Tags

Feedback (2)

, , ,

High definition 6 Way Rf Splitter - Power Divider N-F Connector 130-180MHz JX-PS-2G6G-02N – Jingxin Technology Detail:

Description

Power Divider N-F Connectors Operating 2G-6GHz

Power Divider JX-PS-2G6G-02N is one type of RF passive components designed & produced for sale by Jingxin, which specially features with low insertion loss less than 0.5dB in small volume, measured only: 119mm x 50mm x 28mm (±0.2mm).
The frequency of this microwave divider covers from 2G-6GHz with the pass band of 50MHz, which works under the power of 300W. This power divider is produced with N-female connectors, but which can be switched to others according to the demand. With what powder spraying, such kind of power divider can bear in the field for long time.
As promised, all the RF passive components from Jingxin have 3 years warranty.

Parameter

Parameter	Specification
Dimension	L x W x H: 119mm x 50mm x 28mm (±0.2mm)
Port connectors	N-Female (Material and Plating)
	Outer conductor	Brass; Albay plating/Powder spraying
	Inner conductor	Spring cooper; Ag 5 um plating
Finish	White, Akzo Nobel RAL9016, Powder spraying
Fixation holes	4xФ4.5；Material：Aluminum; Plating: Anti-Oxidation
Environmental conditions	Outdoors
Water Tolerance	IP67
Vibration	5G 5-200Hz,2.5G 5-2000Hz
Shock	20G 11ms (sawtooth pulse according AREMA 11.5.1)
Altitude	4200m
Salt Mist	EN 60068-2-11(ka Class ST4)
Impedance	50 Ohm all ports
Humidity	95%RH 2cycles à 24H 25°C to 55°C (according EN50155:2017 cyclic damp heat test 13.4.7)
Notes	Material shall be RoHS 6/6 and REACH compliant
Frequency range	2-6GHz
Insertion loss	≤3.3dB (type 3.1dB)
Return Loss	≥18dB (type 20dB)
Isolation between output ports	≥3.0dB
Amplitude Balance	±0.5dB (type 0.2dB)
Phase Balance	≤10°
Power Rating	300W
Operating Temperature	-40-85℃

Power Divider N-F Connector

Custom RF Passive Components

As a manufacturer of RF passive components, Jingxin can design various ones according to the clients’ applications.
Only 3 Steps to Solve Your Problem of RF Passive Component
1.Defining the parameter by you.
2.Offering the proposal for confirmation by Jingxin.
3.Producing the prototype for trial by Jingxin.

Product detail pictures: